Skip to main content
Products

Products

Compact Solar Water Heater (Thermo Siphon)

Compact Solar Water Heater (Thermo Siphon)

This is ideal for homes, apartments and residential buildings. Used for supplying domestic hot water with non-pressurized systems.

Products Code GT 10 GT 16 GT 20 GT 24 GT 30
Number of People 1 1-2 2-3 3-4 4and above
Number of Tubes 10 16 20 24 30
Absorber area (net surface) 1 m2 1.6 m2 2 m2 2.4 m2 3 m2
Tank Capacity (L) 80 135 178 200 L 250 L
Dimensions (cm)
(Width-Length-Height)
95-155-170 130-155-146 157-155-170 194-155-170 242-155-170
Weight with water (Kg) 158 249 301 365 450
Productivity 110 L 179 L 232 L 265 L 331 L
Horizontal Solar Collector

Horizontal Solar Collector

  • Open loop, direct/indirect flow
  • For large scale projects
  • Easy to mountain on every surface

Product Code GTC 30 GTC 40 GTC 50
Number of Tubes 30 40 50
Absorber area (net surface) m2 2.4 3.2 4
Dimensions (cm)
(width-length)
365/135 365/175 365/215
Collector material  Stainless steel 304, 2B Stainless steel 304,2B  Stainless steel 304, 2B
Thermalisolation (cm)  Polyurethan 5  Polyurethan 5   Polyurethan 5 
Maximum Working Pressure (Mpa)  0.1 0.1  0.1
Solar Pressurized Compact System

Solar Pressurized Compact System

This is ideal for residential buildings with pressurized hot water systems with stainless steel cylinders.

Product Code GTP 24 GTP 30
Dimensions (cm)
(width-Length-height)
 194-155-170  242-155-170
 Weight with water (Kg)  368   454
Coil capacity (L)  23  23
Working Pressure 4 bar 4 bar
Coil area  (m2) 1.3 1.3
Cold and Hot Water Inlet and Outlet ¾” ¾”
Heat Exchanger Material Stainless Steel Stainless Steel
Vertical Glass Evacuated Tubes Solar Collector

Vertical Glass Evacuated Tubes Solar Collector

This collector is suitable for thermosiphon systems with higher level supplying cold water tank, and for forced systems (direct or indirect pressurized or non-pressurized systems).

It consists of evacuated glass tubes connected vertically to a stainless steel collector. It’s insulated with high-quality polyurethane wrapped with galvanized coated steel or stainless steel. It’s possible to connect more than one collector serially to increase hot water capacity and it can be installed on flat or tilted roofs (0° - 90°).

Widely used in solar thermal projects such as residential and commercial buildings (hotels and schools), swimming pool heating, underground heating systems, and industrial applications, it’s a cost-effective effective and reliable solar collector that has an easy plug-in installation and operation.

Product Code ALTHC 16 ALTHC 20 ALTHC 24
No of tubes 16 20 24
Dimensions (cm)
(width-length)
141/190 173/190 204/190
Collector material Stainless steel 304, 2B Stainless steel 304, 2B Stainless steel 304, 2B
Thermalisolation (cm) Polyurethane 5 Polyurethane 5 Polyurethane 5